1.5 ton low position transmission jacks

Product Introduction

Hydraulic vehicle positioning jacks allow a single person to move cars, trucks and ATV's around the repair facility with ultimate flexibility.

There is no need to jack the vehicle up and place dollies under each tire, as each unit combines a Hydraulic jack and dolly together in one simple piece of equipment.

Perfect for moving vehicles under repair or restored automobiles in confined spaces, dollies allow cars to roll backwards, forwards and sideways easily.

Foot-operated hydraulic jack squeezes the support legs together, smoothly and safely lifting the tire off the ground in seconds

How to use this Hydraulic jack?

Step 1 Place Hydraulic jack on floor and press down on pedal to release pedal lock. Pull out the lock pin from frame.

Step 2 Before operating, open release valve by turning handwheel counterclockwise. Expand Hydraulic jack by hand-wheel enough to place around tire and position so both rollers now contact the tire tread. To obtain the best control of Hydraulic jack while expanding around tire, place your left had on top of the left side axle and your right hand at the center of the pedal. Close release valve by turning handwheel clockwise to a snug-tight position, Jack may now be used.

Step 3 Install Hydraulic jack so that the unit is parallel to the sidewall of the tire to be lifted. Leave approximately 3/4" of clearance between tire and Jack. This is very important. If unit is misaligned, it is possible that the tire will be forced to hit the axle of the Jack and not the rollers, this may damage the Hydraulic jack and void the warranty.

Step 4 To lift tire, flip directional lever up and place foot on pedal depressing with smooth, even strokes. Cycle pedal until tire is lifted from surface one inch or less. After lifting, the lower the tire is to the ground the more stable Hydraulic jack will be. After lifting, be sure always lock the pin in place before operating. Repeat process on the other tires and maneuver the vehicle as required.

Step 5 To release Hydraulic jack, pull the pin out from frame and open valve by turning hand wheel counterclockwise slowly. Hydraulic jack may be removed when rollers disengage from tire.

Main Parameter

Lifting Wt(T)	N.W(kg)	G.W(kg)	Qty(pc)	Carton Size(cm)
1500LB/per unit	62	64	2	88*63*23

Hydraulic Vehicle Positioning Jack(2in1)	63CM*23CM*88CM
Hydraulic Vehicle Positioning Jack(2in1)	63CM*23CM*88CM
Hydraulic Bracket	82CM*11CM*16CM

Vehicle mover hydraulic positioning jacks

Product Introduction

Vehicle mover hydraulic positioning jacks

Need More Room In Your Garage When Storing Your Corvette?

Rolling Hydraulic Jacks Will Make Moving Your Corvette Easy!

Application & Function

Hydraulic jack is brand new tool designed for all sorts of operations.

You will use it in very short time consumption for many operations, such as change your car tires, lift a vehicle, etc.

It’s no need to use other tools as hydraulic jack widely used in many areas, including vehicle workshop, car service shop, auto tool shop, car maintenance shop, and garage.

Hydraulic vehicle positioning jacks allow a single person to move cars, trucks and ATV's around the repair facility with ultimate flexibility.

There is no need to jack the vehicle up and place dollies under each tire, as each unit combines a Hydraulic jack and dolly together in one simple piece of equipment.

Perfect for moving vehicles under repair or restored automobiles in confined spaces, dollies allow cars to roll backwards, forwards and sideways easily.

Foot-operated hydraulic jack squeezes the support legs together, smoothly and safely lifting the tire off the ground in seconds

Main Parameter

Lifting Wt(T)	N.W(kg)	G.W(kg)	Qty(pc)	Carton Size(cm)
1500LB/per unit	62	64	2	88*63*23

Hydraulic Vehicle Positioning Jack(2in1)	63CM*23CM*88CM
Hydraulic Vehicle Positioning Jack(2in1)	63CM*23CM*88CM
Hydraulic Bracket	82CM*11CM*16CM

mechanical rail track jack

Product Introduction

Mechanical track jack is the simplest & sturdiest types of the jacks, widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. Tese Track jacks can be used to lifting both on down and up strockes. They also can be lowered tooth by tooth,and also can be made to tripped off by just moving the trip control.The track jack has simple structure,easily touse safe and reliable. It can be used with many same jacks.It is a good tool used widefly in many lifting fields.

Main Parameter 

Loading capacity： 15t

lifting distance： ≧280mm

rock back and forth distance： 16mm

original height of the claw： 50mm

crowbar length ： 1.5m

full loading lifting force： 1700N

full loading quick down force： 500N

closed height: 530mm

weight： 25kg

Sinking hanging sheave

Product Introduction

Sinking hanging sheave is mainly used for guiding rope direction from winch to lifting container when lifting goods in coal mine vertical shaft and inclined shaft. Sheave mounted on the derrick,which guide the rope direction from hosit roller to lifting container.

Technical Parameter

     Model Max rope dia Single rope max static tension Sheave dia Outer dia Bearing bottom distance Center height Quality (kg)
    
    MZS2.2-0-2×0.5/270-320 Φ23 50KN Φ500 Φ590 590-640 120 304
    
    MZS2.2-0-2×0.5/630-750 Φ23 50KN Φ500 Φ590 950-1070 120 346
    
    MZS2.2-0-2×0.65/270-420 Φ31 100KN Φ650 Φ775 630-780 140 550

Sinking head sheave

Working principle

  1,The wheel of vertical shaft head sheave and sinking sheave is only for rotary motion.

  2,Vertical shaft head sheave is mainly used for lifting of vertical shaft and inclined shaft.

  3,Sinking sheave is used when cutting disc and stable suspension hanging rope.

  4,The wheel of swimming sheave is not only for rotation motion but also for shaft moving, mainly used for lifting of string car.

Technical Parameter

Model    No. Rope sheave outer dia Rope groove bottom circle dia Rope groove radius  Max flow distance Rope dia Rope break force Running inertia
  ㎜ KN Kg?㎡
1 TDG600/9/300 690 600 9 300 14-16 158 4
2 TDG800/11/700 920 800 11 700 ＞16-20 252 13
3 TDG1000/13.5/800 1140 1000 13.5 800 ＞20-24.5 282 31
4 TDG1400/17/740 1580 1400 17 740 ＞24.5-31 597 105

Fixed head sheave

Product Introduction

Fixed head sheave is mounted on the derrick, for supporting the dragging between hoist roller and hoist containers, guide wire rope steering. Rope groove with plastic lining or rubber block, increasing the service life of wire rope.

Technical Parameter

  Model,  Head Sheave Diamm,  Rope diamm,  Bearing distancemm
 TlG-800/16           800                  16                        500
 TlG-1000/20        1000                 20                        550
 TlG-1200/20        1200                 20                        550

Head Sheave

Product Introduction

Head sheave is mounted on the derrick, for supporting the dragging between hoist roller and hoist containers, guide wire rope steering. Rope groove with plastic lining or rubber block, increasing the service life of wire rope.

Category

①vertical shaft head sheave,②Sinking head sheave,③Swimming head sheave

Working principle

1,The wheel of vertical shaft head sheave and sinking sheave is only for rotary motion.
2,Vertical shaft head sheave is mainly used for lifting of vertical shaft and inclined shaft.
3,Sinking sheave is used when cutting disc and stable suspension hanging rope.
4,The wheel of swimming sheave is not only for rotation motion but also for shaft moving, mainly used for lifting of string car.